diff --git a/board/compulab/cl-som-imx7/cl-som-imx7.c b/board/compulab/cl-som-imx7/cl-som-imx7.c
index 1bc33b0..94e7bf1 100644
--- a/board/compulab/cl-som-imx7/cl-som-imx7.c
+++ b/board/compulab/cl-som-imx7/cl-som-imx7.c
@@ -12,7 +12,7 @@
 #include <mmc.h>
 #include <phy.h>
 #include <netdev.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <power/pmic.h>
 #include <power/pfuze3000_pmic.h>
 #include <asm/mach-imx/mxc_i2c.h>
@@ -68,7 +68,7 @@
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 #define CL_SOM_IMX7_GPIO_USDHC3_PWR	IMX_GPIO_NR(6, 11)
 
@@ -116,7 +116,7 @@
 
 	return 0;
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #ifdef CONFIG_FEC_MXC
 
diff --git a/board/compulab/cl-som-imx7/common.c b/board/compulab/cl-som-imx7/common.c
index e0f90fd..40ba0f7 100644
--- a/board/compulab/cl-som-imx7/common.c
+++ b/board/compulab/cl-som-imx7/common.c
@@ -8,7 +8,7 @@
  */
 
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm-generic/gpio.h>
 #include "common.h"
 
@@ -23,7 +23,7 @@
 
 #endif /* CONFIG_SPI */
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 int board_mmc_getcd(struct mmc *mmc)
 {
@@ -42,4 +42,4 @@
 	return ret;
 }
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
diff --git a/board/compulab/cl-som-imx7/common.h b/board/compulab/cl-som-imx7/common.h
index 8b15a59..bc19867 100644
--- a/board/compulab/cl-som-imx7/common.h
+++ b/board/compulab/cl-som-imx7/common.h
@@ -9,19 +9,19 @@
 
 #define PADS_SET_PROT(pads_array) void cl_som_imx7_##pads_array##_set(void)
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #define CL_SOM_IMX7_GPIO_USDHC1_CD	IMX_GPIO_NR(5, 0)
 PADS_SET_PROT(usdhc1_pads);
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 PADS_SET_PROT(uart1_pads);
 #ifdef CONFIG_SPI
 PADS_SET_PROT(espi1_pads);
 #endif /* CONFIG_SPI */
 
 #ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 PADS_SET_PROT(usdhc3_emmc_pads);
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 #ifdef CONFIG_FEC_MXC
 PADS_SET_PROT(phy1_rst_pads);
 PADS_SET_PROT(fec1_pads);
diff --git a/board/compulab/cl-som-imx7/mux.c b/board/compulab/cl-som-imx7/mux.c
index e29d2de..18f16a4 100644
--- a/board/compulab/cl-som-imx7/mux.c
+++ b/board/compulab/cl-som-imx7/mux.c
@@ -17,7 +17,7 @@
 	imx_iomux_v3_setup_multiple_pads(pads_array, ARRAY_SIZE(pads_array));  \
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 #define USDHC_PAD_CTRL		(PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
 				PAD_CTL_HYS | PAD_CTL_PUE | \
@@ -36,7 +36,7 @@
 
 PADS_SET(usdhc1_pads)
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #define UART_PAD_CTRL		(PAD_CTL_DSE_3P3V_49OHM | \
 				PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
@@ -69,7 +69,7 @@
 
 #ifndef CONFIG_SPL_BUILD
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
 	MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -89,7 +89,7 @@
 
 PADS_SET(usdhc3_emmc_pads)
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #ifdef CONFIG_FEC_MXC
 
diff --git a/board/compulab/cl-som-imx7/spl.c b/board/compulab/cl-som-imx7/spl.c
index 76a4c8b..f9a19f0 100644
--- a/board/compulab/cl-som-imx7/spl.c
+++ b/board/compulab/cl-som-imx7/spl.c
@@ -9,14 +9,14 @@
 
 #include <common.h>
 #include <spl.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/arch-mx7/mx7-pins.h>
 #include <asm/arch-mx7/clock.h>
 #include <asm/arch-mx7/mx7-ddr.h>
 #include "common.h"
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
 	USDHC1_BASE_ADDR, 0, 4};
@@ -27,7 +27,7 @@
 	cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 	return fsl_esdhc_initialize(bis, &cl_som_imx7_spl_usdhc_cfg);
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 static iomux_v3_cfg_t const led_pads[] = {
 	MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 | MUX_PAD_CTRL(PAD_CTL_PUS_PU5KOHM |
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index d42f57d..e9262c6 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -12,7 +12,7 @@
 #include <dm.h>
 #include <dwc_ahsata.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <mtd_node.h>
 #include <netdev.h>
@@ -608,7 +608,7 @@
 	cm_fx6_setup_display();
 
 	/* This should be done in the MMC driver when MX6 has a clock driver */
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 	if (IS_ENABLED(CONFIG_BLK)) {
 		int i;
 
diff --git a/board/compulab/cm_fx6/common.c b/board/compulab/cm_fx6/common.c
index e1e4a67..ed8c7a3 100644
--- a/board/compulab/cm_fx6/common.c
+++ b/board/compulab/cm_fx6/common.c
@@ -11,10 +11,10 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/spi.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include "common.h"
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
 	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
 	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
index acbb2ad..66186ec 100644
--- a/board/compulab/cm_fx6/spl.c
+++ b/board/compulab/cm_fx6/spl.c
@@ -16,7 +16,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/mach-imx/iomux-v3.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include "common.h"
 
 enum ddr_config {